Notes/Methods

How these notes are put together

Every note on this site follows the same structure: the claim, the instrument, the procedure, the acceptance band, the failure modes and the record. If a number cannot be measured in a workshop, it is not presented as a fact.

1. Instruments before opinions

A torque wrench, a dial indicator, a four-wire meter, a thermal probe and a graduated cylinder cover most of what these notes ask for. When a procedure needs a tool that a normal workshop does not own, the note says which substitute is acceptable and what accuracy is lost.

2. Bands, not absolutes

Acceptance bands are stated as ranges with the reason attached. A band that depends on the part in front of you is written as a decision rule, not as a universal tolerance.

3. The record is part of the procedure

A measurement that is not recorded did not happen. Each note ends with the fields that belong on a delivery or service record, because the record is what makes a warranty conversation short.

4. What we do not do

We do not publish performance claims that were not measured, and we do not present marketing figures as test results. Where a figure comes from a manufacturer datasheet, the note says so.

5. Corrections

If a procedure here turns out to be wrong in practice, the correction is published in the note rather than quietly removed. The date at the bottom of each page is the date of the last revision.